If anyone wants to replicate, this is the drawing I took to the metal shop to have the 14ga steel cut and bent. Cost me $32 but was ABSOLUTELY worth it. The ONE change I would make is the overall outer height, I'd extend that from 2 5/8 inches to a full 2 3/4 inches. That 1/8 inch I added after the fact with an aluminum bar stock spacer.
tt99c5
0 0

20230224 144113

2218 × 4656 — JPEG 1.8 MB

Added to Node 304 Custom Build — 1 year ago — 1700 views

If anyone wants to replicate, this is the drawing I took to the metal shop to have the 14ga steel cut and bent. Cost me $32 but was ABSOLUTELY worth it. The ONE change I would make is the overall outer height, I'd extend that from 2 5/8 inches to a full 2 3/4 inches. That 1/8 inch I added after the fact with an aluminum bar stock spacer.

LGE LM-V405 1/40s ƒ/190/100 ISO100 2180/1000mm — More Exif data

  • Manufacturer LGE
  • Model LM-V405
  • Exposure Time 1/40s
  • Aperture ƒ/190/100
  • ISO 100
  • Focal Length 2180/1000mm
  • X Resolution 72/1 dpi
  • Y Resolution 72/1 dpi
  • Resolution Unit inches
  • Color Space sRGB
  • Orientation Rotate 90 CW
  • Brightness Value 45/100
  • Sensing Method Monochrome area
  • Scene Capture Type Standard
  • Exposure Bias Value 0/6
  • Max Aperture Value 185/100
  • Exposure Program Program AE
  • Exposure Mode Auto
  • Metering Mode Center-weighted average
  • Light Source Unknown
  • Flash Off, Did not fire
  • White Balance Auto
  • Exif Version 0220
  • Date Time Original 2023-02-24 14:41:13
  • Date Time Digitized 2023-02-24 14:41:13